在圍擋施工完畢的時候可能會發現有些方面出錯了，比如位置不是很準確等等，當這種情況發生的時候我們應該怎么辦呢？做什么能夠補救回來呢？

　　When the enclosure construction is completed, it may be found that some aspects are wrong, such as the position is not very accurate and so on. When this happens, what should we do? What can be done to remedy it?

　　圍擋廠家讓認為可以通過調節內六角螺絲，斜拉桿側面的內六角螺絲，以達到校正框扇的搭接量不合適的目的。工地圍擋安裝時窗框傾斜，發生的原因是安裝時沒用線墜和靠尺檢查窗的垂直度，對于這種大意造成的錯誤一定要避免。

　　Enclosure manufacturers think that by adjusting the hexagon screws, oblique pull rod side hexagon screws, in order to achieve the purpose of correcting the lap amount of the frame fan is not appropriate. Site enclosure installation window frame tilt, the cause of the occurrence is the installation of no line pendant and by ruler inspection window verticality, for this kind of carelessness caused by the mistake must be avoided.

　　玻璃墊片位移或者位置不對而使窗扇因為玻璃重力發生變形，的方法是依據科學的墊片放置方法重新正確安裝工地圍擋。窗扇變形有時也是一些外力破壞所致，因為安裝而造成的變形要重新安裝，并嚴格按照說明書規定的方法和標準正確操作。

　　The displacement or position of the glass gasket is not correct so that the window sash is deformed due to the glass gravity. The solution is to install the site enclosure correctly according to the scientific placement method of the gasket. Window sash deformation is sometimes caused by the destruction of some external forces, because of the installation of the deformation caused by re-installation, and in strict accordance with the specification of the method and standard correct operation.

　　框扇對角線偏差太大，遠遠的超過允許偏差，這主要是下料或者焊接造成的偏差。出現這種情況人為的調節作用不大，需切割工地圍擋重做。工地圍擋是所用五金件的機械力學性能達不到窗的要求，門窗使用劣質五金件后。容易出現。

　　The diagonal deviation of the frame fan is too large, far beyond the allowable deviation, which is mainly caused by blanking or welding. In this case, artificial adjustment effect is not big, need to cut the site enclosure to do again. Site enclosure is to use the mechanical mechanical properties of hardware does not reach the requirement of the window, after door window uses inferior hardware. Easy to appear.

　　現在工程圍擋的重復利用也是可以進行的，這樣我們調整的工程圍擋就重新有了用武之地了，而不是一旦建設完成就必須拆掉，這樣既浪費材料成本，又對環境造成了污染。并且工程圍擋對于行人車輛、人員財產起到保護作用，對于防塵降噪、美化城市也是發揮了積極作用。

　　Now the reuse of the project enclosure can also be carried out, so that we adjust the project enclosure will be used again, rather than once the completion of the construction must be removed, which is a waste of material costs, and caused pollution to the environment. And the project enclosure plays a protective role in the safety of pedestrians and vehicles, personnel and property, and also plays a positive role in dustproof noise reduction and beautification of the city.

　　圍擋安裝出錯之后怎么進行補救？以上問題的相關解答了，如果您在使用期間發現了新的問題出現且找不到原因的話，可以來網站www.xalianjia.com進行咨詢交流。

　　After the installation of enclosure error how to remedy? The above questions are answered. If you find a new problem during use and can not find the reason, you can come to the website www.xalianjia.com for consultation and communication.